Flow Meter Air Limbah/Kotor/Sewage SHM 10 Inch DN 250


SHM Sewage Flow Meters : Analog/ Mechanical Flow Meter for Water & Waste water is an epoxy coated cast iron, it has great flow rate measure and resistant from many light chemical and corrosion.  It can be used for remote reading transmission system as equipped with built-in  sensor (optional) and with data logger, it can record for last six months logs.


SHM Sewage Meters can be used for :

  • Sewage Treatment Plant (STP) ie. Hospital, Hotel, Industrial, Mall, Residential, Palm Oil, etc.
  • Raw water, sludge water and many others
  • Inlet and Outlet Water Treatment
  • Best suited for pump system and high flow rate


  1. Easy installation and maintenance
  2. Dry dial, Magnetic drive
  3. High Bypass and very low head loss
  4. Glass vacuum sealed register, free from condensation and remain clear for long term
  5. Working temperature 0.1-50°C for cold water and 0.1-90°C for hot water
  6. Max. Pressure : 16 Bar. Max. Error : +/_2%
  7. Protection Grade : IP 68
  8. ISO 9001 & ISO 4064
  9. Warranty 2 years (Full service and spare parts)

Technical Specifications

Size (DN) : 250, 10 Inch, (250 mm)

Max. Flow QMax : 800 m³/hour

Continues Flow QN : 400 m³/hour

Transitional Flow QT : 80 m³/hour

Min Flow QMin : 12 m³/hour

Length (L) : 450 mm

High (H) : 435 mm

Connection Flange : Outside Diameter (D1) 405, Bolt inner Diameter (D2) 350

Weights : 68 Kg

Click Here For The Other Size

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *