Meter Air AMICO 3 Inch


Meter Air AMICO 3 Inch 80 mm LXLG-80E

Woltman Water Meter With Parallel Turbine Shaf

Woltman parallel type meters are always used when high flow rates with a relative constant flow rate profile are to be measured. Through its robust construction they not only are capable of covering a large measuring range, but the measuring accuracy is also long-term stable.

They hydrodynamic optimize turbine is reliably operated already at small flow rates and “upwards” is has enough power reserve to reliably measure flow rate peaks. Especially strong bearings with low friction guarantee a long life of the meter.

Reed sensors, optical and inductive – NAMUR sensors can always be retrofitted without the damaging calibration eal. Then the meter can be integrated with data communication or automation or automation and control systems in a simple and flexible way.

Performance Characteristics in Overview :

  • Low starting flow, high overload security
  • Wide measuring range
  • Removable measuring insert
  • Low head loss
  • Hydraulic bearing relieve for long-term measuring stability
  • Retrofittable with active nd passive pulser
  • Metal Protective cover serially, plastics optional
  • Evacuated counter protected from condensation
  • Dry dial counter with large number rollers simplifies the readability
  • For cold water up to 30°C , with security up to 50°C
  • For horizontal, vertical installation positions
  • High Pressure

Meter Air AMICO 3 Inch

Technical Data Meter Air AMICO 3 Inch :

  • Nominal Diameter : DN 80
  • Nominal Flow (Qn) : 40 m³/hour
  • Overall Length (L) : 225 mm
  • Metrological class : B
  • Maximum Flow (short-term) Qmax : 150m³/hour
  • Maximum Flow (constant) : 90m³/hour
  • Transitional Flow (Qt) : 3.2m³/hour
  • Minimum Flow (Qmin) : 0.8m³/hour
  • Flow Rate with 0.1 bar head lose : 70m³/hour
  • Head lost at Qmax : 0.2 bar
  • Display range : Min 2 l/ Max 9.999.999m³
  • Maximum temperature : 50°C
  • Operating pressure, max : 16 bar
  • Height (H) : 255 mm
  • Flange diameter (D) : 200 mm

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *