AMICO 2.5 Inch LXSG-65E

AMICO 2.5 Inch LXSG-65E Woltman Water Meter With Parallel Turbine Shaft

Woltman parallel type meters are always used when high flow rates with a relative constant flow rate profile are to be measured. Through its robust construction they not only are capable of covering a large measuring range, but the measuring accuracy is also long-term stable.

They hydrodynamic optimize turbine is reliably operated already at small flow rates and “upwards” is has enough power reserve to reliably measure flow rate peaks. Especially strong bearings with low friction guarantee a long life of the meter.

Reed sensors, optical and inductive – NAMUR sensors can always be retrofitted without the damaging calibration eal. Then the meter can be integrated with data communication or automation or automatin and control systems in a simple and flexible way.

AMICO 2.5 Inch LXSG-65E

Performance Characteristics in Overview :

  • Low starting flow, high overload security
  • Wide measuring range
  • Removable measuring insert
  • Low head loss
  • Hydraulic bearing relieve for long-term measuring stability
  • Retrofittable with active nd passive pulser
  • Metal Protective cover serially, plastics optional
  • Evacuated counter protected from condensation
  • Dry dial counter with large number rollers simplifies the readability
  • For cold water up to 30°C , with security up to 50°C
  • For horizontal, vertical installation positions
  • High Pressure

Technical Data AMICO 2.5 Inch LXSG-65E :

  • Nominal Diameter : DN 65
  • Nominal Flow (Qn) : 25 m³/hour
  • Overall Length (L) : 220 mm
  • Metrological class : B
  • Maximum Flow (short-term) Qmax : 120m³/hour
  • Maximum Flow (constant) : 60m³/hour
  • Transitional Flow (Qt) : 2 m³/hour
  • Minimum Flow (Qmin) : 0.45m³/hour
  • Flow Rate with 0.1 bar head lose : 50 m³/hour
  • Head lost at Qmax : 0.1 bar
  • Display range : Min 2 l/ Max 9.999.999m³
  • Maximum temperature : 50°C
  • Operating pressure, max : 16 bar
  • Height (H) : 208 mm
  • Flange diameter (D) : 185 mm

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *