Flow Meter Limbah SHM 4 Inch

Analog/ Mechanical Clean/ Sewage Water Meter Cold 50°C and Hot 90°C Size DN 50-DN 300 (2″-12″)


SHM Sewage Flow Meters : Analog/ Mechanical Flow Meter for Water & Waste water is an epoxy coated cast iron, it has great flow rate measure and resistant from many light chemical and corrosion.  It can be used for remote reading transmission system as equipped with built-in  sensor (optional) and with data logger, it can record for last six months logs.


SHM Sewage Meters can be used for :

  • Sewage Treatment Plant (STP) ie. Hospital, Hotel, Industrial, Mall, Residential, Palm Oil, etc.
  • Raw water, sludge water and many others
  • Inlet and Outlet Water Treatment
  • Best suited for pump system and high flow rate


  1. Easy installation and maintenance
  2. Dry dial, Magnetic drive
  3. High Bypass and very low head loss
  4. Glass vacuum sealed register, free from condensation and remain clear for long term
  5. Working temperature 0.1-50°C for cold water and 0.1-90°C for hot water
  6. Max. Pressure : 16 Bar. Max. Error : +/_2%
  7. Protection Grade : IP 68
  8. ISO 9001 & ISO 4064
  9. Warranty 2 years (Full service and spare parts)

Technical Specifications

Size (DN) : 100, 4 Inch, (100 mm)

Max. Flow QMax : 120 m³/hour

Continues Flow QN : 60 m³/hour

Transitional Flow QT : 12 m³/hour

Min Flow QMin : 1.8 m³/hour

Length (L) : 250 mm

High (H) : 291 mm

Connection Flange : Outside Diameter (D1) 220, Bolt inner Diameter (D2) 180

Weights : 18 Kg

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *