Tokico oil flowmeters are positive displacement type flow meter which are used in a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as for transactions for kerosene, light oil and heavy oil.
This flowmeter is widely used for transaction and in other applications is which a Roots type flowmeter is most suitable.
The Roots rotor rotates without physical contact, resulting in extremely low pressure loss. In addition, its accuracy remain virtually unchanged over a long period of time.
- Wide flow range and high accuracy
The accuracy of these flowmeters is within ±0.5% over a wide range of flow rates (max range of 1 : 150 for heavy oil)
- Small pressure loss
Because the pressure loss of these meters is low, it is possible to perform accurate measuring at the suction side of a pump as well as accurate measurement of high viscosity fluids.
- Compact Design
A positive displacement type flowmeter can be used at relatively high rotating speeds, making for compact design. In addition, the counter unit of these meters is compact yet easy-to-read, and construction is simple.
- Excellent durability
The simple construction of these meters makes for longterm durability with virtually no degradation of accuracy
- An electrical transmitter Unit attachable
A microswitch or a reed switch type transmitter unit having simple construction and high reliability is available.
Specification Product :
Model : FRO Type
Bore : 80 mm
Model No. Direct-reading integrating type : FRO0845-04X
Accuracy : ±0.5%
Max. Working pressure : 10kgf/cm²
Hydraulic test pressure : 20kgf/cm²
Max. working temperature :
50°C for kerosene and light oil (100°C with the FGB type)
100°C for heavy oil (120°C with the FGB-00X and FGB-02X types)
Flange rating : JIS 10kgf/cm²FF
Mterial Body : Cast iron (FC25)
Material rotor : FRO Type : Aluminium Alloy Casting
Counter Unit : Integrating pointer and integrating counter ( a reset counter is also available)
Electrical Transmitter Unit
Transmitter : FRO Type : Microswitch (M)
Power Supply : AC100V 50/60 Hz as standard
Number of Pulse : 0~5 PPS
Output signal : ON-OFF contact
Transmission cable : 2-wire cable with cabtype