FLOWMETER LIMBAH SHM DN80 . APPLICATION : Sewage Treatment Plant (STP) ie. Hospital, Hotel, Industrial, Mall, Residential, Palm Oil, etc.
Analog/ Mechanical Clean/ Sewage Water Meter Cold 50°C and Hot 90°C Size DN 50-DN 300 (2″-12″)
DESCRIPTION :
SHM Sewage Flow Meters : Analog/ Mechanical Flow Meter for Water & Waste water is an epoxy coated cast iron, it has great flow rate measure and resistant from many light chemical and corrosion. It can be used for remote reading transmission system as equipped with built-in sensor (optional) and with data logger, it can record for last six months logs.
APPLICATION :
SHM Sewage Meters can be used for :
- Sewage Treatment Plant (STP) ie. Hospital, Hotel, Industrial, Mall, Residential, Palm Oil, etc.
- Raw water, sludge water and many others
- Inlet and Outlet Water Treatment
- Best suited for pump system and high flow rate
FEATURES :
- Easy installation and maintenance
- Dry dial, Magnetic drive
- High Bypass and very low head loss
- Glass vacuum sealed register, free from condensation and remain clear for long term
- Working temperature 0.1-50°C for cold water and 0.1-90°C for hot water
- Max. Pressure : 16 Bar. Max. Error : +/_2%
- Protection Grade : IP 68
- ISO 9001 & ISO 4064
- Warranty 2 years (Full service and spare parts)
TECHNICAL SPECIFICATIONS FLOWMETER LIMBAH SHM DN80
- Size (DN) : 80, 3 Inch, (80 mm)
- Max. Flow QMax : 80 m³/hour
- Continues Flow QN : 40 m³/hour
- Transitional Flow QT : 8 m³/hour
- Min Flow QMin : 1.2 m³/hour
- Length (L) : 225 mm
- High (H) : 281 mm
- Connection Flange : Outside Diameter (D1) 200, Bolt inner Diameter (D2) 160
- Weights : 16 Kg
