Jual Flow Meter SHM 1 Inch Air Panas


Analog/Mechanical Brass Multi Jet Vane Wheel Dry Dial Cold 50°C and Hot 90°C Clean Water Meter Size DN 15-DN 50 (1/2″-2″)

Description :

SHM Multi Jet Brass Flow Meters : Analog/Mechanical Flow Meter for Clean Water are made from brass material and nternal measuring component made from modern thermoplastic material.

Application:

SHM Multi Jet Brass Flow Meters can be used for :

  • Irrigation, cooling systems, filtration systems, water monitoring, residentials, etc.

Features :

  • Multi Jet, Dry Dial, Turbine Type
  • Magnetic Drive reliable characteristic, long working life. Pulse output Optional.
  • Vacuum sealed register ensures the dial keep free from fog and frost, keep the reading clear in a long term service.
  • Working temperature 0.1-50°C for Cold Water and 0.1-90°C for Hot water
  • Water pressure </=1.0 Mpa 0r 1.6 Mpa
  • Protection Grade : IP 68
  • Maximum Pemissible Error :
  • In the lower zone from qmin inclusive up to but excluding qt is +/-5%
  • In the upper zone from qt inclusive up to and qs is +/-2%. For hot water meter +/-3%
  • ISO 9001 and ISO 4064
  • Warranty 2 years (Full service and spare parts)

Technical Specifications

Size (DN) : 25, 1 Inch, (25 mm)

Over Load Flow Qs : 7 m³/hour

Permanent Flow Qp : 3.5 m³/hour

Transitional Flow QT : 280 l/hour

Min Flow Qmin : 70 l/hour

Length (L) : 260 mm

Width : 103.5 mm

High (H) : 124 mm

Weights : 1.85 Kg

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *