The multi-jet dry dial meter has been tried and tested a measuring points where a wet dial cannot be used or is not desired. It is characterised by the guaranteed readability of the digit rollers combined with the reliable measuring principle of a multi-jet meter. Constant development guarantees accurate measuring results and the best long-term stability.
It is available in the well-known WVG body or the flow-optimised ZR-body.
Performance Characteristic in overview :
- counter construction dry dial
- Proven through worlwide use a million times over
- Viewing window made of high-quality UV-proof plastic
- For horizontal piping
Technical Data :
- Nominal Flow Qn : 1.5 m³/h
- Nominal Diameter DN : 15 mm 1/2 Inch
- Overall length without conn. L2 : 110/115 mm
- Overall length without connectors L1 : 225/230 mm
- Thread meter G x B D1 : 3/4 inch
- Thread connector Rx D2 : 1/2 Inch
- Maximum Flow Qmax : 3 m³/h
- Minimum Flow Qmin : 15 l/h
- Starting Flow : 4 l/h
- Display range min : 0.05 l
- Display range max : 99.999 m³
- Maximum Teperature : 30° C
- Operating pressure, max. PN : 16 bar
- Head Loss at Qmax : 0.6 bar
- Pulse value : 10/100 l/mp